Twój koszyk

Aktualnie w koszyku:

Brak towarów

  Wszyscy producenci

Kategorie

Samoloty

Pojazdy wojskowe

Kalkomanie

Literatura

Okręty

Narzędzia modelarskie

Zmień sposób wyświetlania:
  •   Krótki
  •   Średni
  •   Pełny
« pierwsza   < poprzednia następna >   ostatnia »

Narzędzia modelarskie

  • Pick-up Pencil

    Pick-up Pencil

    Nr katalogowy: RB-PP, Producent: RB Productions

    cena:
    więcej »
    7,50 pln
    • This is a tool that can be used to handle parts that are too small to handle with a tweezers or parts that are hard to grab with tweezers. The tip is slightly tacky, not too sticky to make it hard to release the part when you need to, just enough to pick-up small parts without leaving any residue. When it loses tackiness or becomes blunt, just sharpen it. For the best results, use a desktop sharpener or a scalpel. When sharpening the tip with a scalpel you can shape it as you need, for example as a point, a chisel or a flat area. Avoid blunt sharpeners as they will break the tip.

    • Intended for very small parts. Perfect for scratch-building.

  • Saw Blade Holder

    Saw Blade Holder

    Nr katalogowy: RB-SAW, Producent: RB Productions

    cena:
    więcej »
    24,00 pln
    • This is the holder for the following saw blades:
    • Coarse saw blade
    • Medium saw blade
    • Fine saw blade
    • Ultra fine saw blade

    • This holder is essential as it holds the blades straight and stiffens them. This improves the cutting, it prolongs the life of the blade and prevents any possible injury by keeping fingers away from the sharp edges of the blade.

    • The set contains one holder and two screws+nuts, which are all made entirely from stainless steel.

    • The set does not include the knife handle.

  • Flip-R10 Folding Tool for Photo Etched Parts

    Flip-R10 Folding Tool for Photo Etched Parts

    Nr katalogowy: RB-T001, Producent: RB Productions

    cena:
    więcej »
    102,50 pln
    • This is a bending tool for photoetched parts. This can bend any commercially available photoetched parts up to a length of 10 cm (approx 4 in). Suitable for all scales and all types of modeling.

    • This tool works by the same principle as the hinged bending brakes that can be found in many metal workshops around the world. The photoetched parts are held in place between the base and the bending attachment, then they are bent by pivoting the hinged bending plate. The tool can also be used in the more "traditional" manner whereby a blade can be used to bend the parts.

    • The tool is made from stainless steel and can be easily stored in your toolbox.

    • The tool comes flat packed and minor assembly is required.

    • The office clamps depicted in the pictures are not included in the package, but they can be obtained cheaply from any local office supplier. For most usual bends, finger pressure is enough to hold the parts in place.

  • Flip-R5 Folding Tool for Photo Etched Parts

    Flip-R5 Folding Tool for Photo Etched Parts

    Nr katalogowy: RB-T002, Producent: RB Productions

    cena:
    więcej »
    57,00 pln
    • This is a bending tool for photoetched parts. This can bend any commercially available photoetched parts up to a length of 5 cm (approx 2 in). Suitable for all scales and all types of modeling.
    • This tool works on the same principle as the hinged bending brakes that can be found in many metal workshops around the world. The photoetched parts are held in place between the base and the bending attachment, then they are bent by pivoting the hinged bending plate. The tool can also be used in the more "traditional" manner whereby a blade can be used to bend the parts.
    • The tool is made from tough stainless steel and can be easily stored in your toolbox.
    • The tool comes flat packed and minor assembly is required.
    • The office clamps depicted in the pictures are not included in the package, but they can be obtained cheaply from any local office supplier. For most usual bends, finger pressure is enough to hold the parts in place.
  • Attachment for Flip-R5 - for Tapered Bends

    Attachment for Flip-R5 - for Tapered Bends

    Nr katalogowy: RB-T003, Producent: RB Productions

    cena:
    więcej »
    10,00 pln
    • This is an attachment for the Flip-R5 folding tools. This is an expansion tool for the Flip-R5 (RB-T002), sold separately.
    • This tool can be used to bend tapered photo-etched parts such as crane arms, antenna masts, etc.
  • Attachment for Flip-R5 - for Channel/Parallel Bends

    Attachment for Flip-R5 - for Channel/Parallel Bends

    Nr katalogowy: RB-T004, Producent: RB Productions

    cena:
    więcej »
    10,00 pln
    • This is an attachment for the Flip-R5 folding tools. This is an expansion tool for the Flip-R5 (RB-T002), sold separately.
    • This tool can be used to make parallel bends in photo-etched parts such as channels, ship catapults, ship ladders, ship armour shields, boxes, aircraft canopies, etc.
  • Attachment for Flip-R5 - for handles

    Attachment for Flip-R5 - for handles

    Nr katalogowy: RB-T005, Producent: RB Productions

    cena:
    więcej »
    10,00 pln
    • This is an attachment for the Flip-R5 folding tools. This is an expansion tool for the Flip-R5 (RB-T002), sold separately.
    • This tool can be used to make handles, ship ladders, etc. The tool is marked with measurements that make replicating such parts very easy. The handle dimensions can range from 1mm to 14.5mm.
  • Attachment for Flip-R10 - for Tapered Bends

    Attachment for Flip-R10 - for Tapered Bends

    Nr katalogowy: RB-T006, Producent: RB Productions

    cena:
    więcej »
    18,00 pln
    • This is an attachment for the Flip-R10 folding tools. This is an expansion tool for the Flip-R10 (RB-T001), sold separately.
    • This tool can be used to bend tapered photo-etched parts such as crane arms, antenna masts, etc. 4 different angles provided.
  • Attachment for Flip-R10 - for Channel/Parallel Bends

    Attachment for Flip-R10 - for Channel/Parallel Bends

    Nr katalogowy: RB-T007, Producent: RB Productions

    cena:
    więcej »
    18,00 pln
    • This is an attachment for the Flip-R10 folding tools. This is an expansion tool for the Flip-R10 (RB-T001), sold separately.
    • This tool can be used to make parallel bends in photo-etched parts such as channels, ship catapults, ship ladders, ship armour shields, boxes, aircraft canopies, etc.
  • Attachment for Flip-R10 - for Handles

    Attachment for Flip-R10 - for Handles

    Nr katalogowy: RB-T008, Producent: RB Productions

    cena:
    więcej »
    18,00 pln
    • This is an attachment for the Flip-R10 folding tools. This is an expansion tool for the Flip-R10 (RB-T001), sold separately.
    • This tool can be used to make handles, ship ladders, etc. The tool is marked with measurements that make replicating such parts very easy. The handle dimensions can range from 1mm to 20.5mm.
  • RIVET-R Rivet Tool.

    RIVET-R Rivet Tool.

    Nr katalogowy: RB-T009, Producent: RB Productions

    cena:
    więcej »
    36,00 pln
    • RIVET-R rivet tool.

    • This is an attachment for a standard craft/hobby knife. Use this tool to scribe rivets on plastic, resin and even soft metals. This tool makes round imprints rather than the square imprints made by other tools.

    • The tool comes with 4 separate wheels with the following pitch (distance between rivets):

    • 0.75mm (~0.03in)
    • 1.00mm (~0.04in)
    • 1.25mm (~0.05in)
    • 1.50mm (~0.06in)
  • RIVET-R Mini Rivet Tool

    RIVET-R Mini Rivet Tool

    Nr katalogowy: RB-T010, Producent: RB Productions

    cena:
    więcej »
    32,00 pln
    • RIVET-R Mini rivet tool. This is a smaller-diameter riveting tool that can get into tighter spaces.

    • This is an attachment for a standard craft/hobby knife. Use this tool to scribe rivets on plastic, resin and even soft metals. This tool makes round imprints rather than the square imprints made by other tools.

    • The tool comes with 4 separate wheels with the following pitch (distance between rivets):

    • 0.75mm (~0.03in)
    • 1.00mm (~0.04in)
    • 1.25mm (~0.05in)
    • 1.50mm (~0.06in)

    • The tool is made entirely from stainless steel.

  • 0.65 and 0.55 mm - Optional Extra Wheels for Rivet-R Tool

    0.65 and 0.55 mm - Optional Extra Wheels for Rivet-R Tool

    Nr katalogowy: RB-T011, Producent: RB Productions

    cena:
    więcej »
    18,00 pln
    • Optional extra wheels for the RIVET-R rivet tool.
    • These are extra wheels for the Rivet-R tool.
    • This package contains only the scribing wheels, it is intended as an add-on to the Rivet-R tool and does not include the holder and screw included in the Rivet-R package.

    • Use this tool to scribe rivets on plastic, resin and even soft metals. This tool makes round imprints rather than the square imprints made by other tools.

    • The package contains only 2 separate wheels with the following pitch (distance between rivets):

    • 0.65mm (~0.025in)
    • 0.55mm (~0.02in)

    • The tool is made entirely from stainless steel.

  • 0.65 and 0.55 mm - Optional Extra Wheels for Rivet-R MINI Tool

    0.65 and 0.55 mm - Optional Extra Wheels for Rivet-R MINI Tool

    Nr katalogowy: RB-T012, Producent: RB Productions

    cena:
    więcej »
    16,00 pln
    • Optional extra wheels for the RIVET-R MINI rivet tool.
    • This package contains only the scribing wheels, it is intended as an add-on to the Rivet-R MINI tool and does not include the holder and screw included in the Rivet-R MINI package.

    • Use this tool to scribe rivets on plastic, resin and even soft metals. This tool makes round imprints rather than the square imprints made by other tools.

    • The package contains only 2 separate wheels with the following pitch (distance between rivets):

    • 0.65mm (~0.025in)
    • 0.55mm (~0.02in)

    • The tool is made entirely from stainless steel.

    IMPORTANT: this set is designed for use wi

  • Rapid-cut Saw Blade

    Rapid-cut Saw Blade

    Nr katalogowy: RB-T014, Producent: RB Productions

    cena:
    więcej »
    12,50 pln
    • Fast-cut saw blade. (12 t/cm - 30 tpi)

    • This saw blade is a medium size blade with larger teeth recommended for rapid cuts. This saw blade can be used to cut plastic, wood and resin and is ideal for removing resin casting blocks. It cuts through resin like a hot knife through butter and if you work with resin parts or plan to do so in the future, this is an essential tool.

    • This saw is inspired by the Japanese Ryoba traditional saws that have teeth on both edges of the blade with the teeth handed, respectively "pull cut" on one side and "push cut" on the other side. The direction of the cut is indicated by an arrow etched into the blade.

    • It is highly recommended that this saw blade is fitted into the specially designed holder available separately. This holder allows the blade to be mounted either in a central or an offset position to increase the range of uses.

    • This blade is made from stainless steel and is quite stiff and sturdy.

  • Medium Saw Blade

    Medium Saw Blade

    Nr katalogowy: RB-T015, Producent: RB Productions

    cena:
    więcej »
    12,50 pln
    • Medium saw blade (16 t/cm - 40 tpi)

    • This is a medium-fine saw blade and is recommended for most model-related cuts. This blade can be used to cut plastic, wood and resin.

    • This saw is inspired by the Japanese Ryoba traditional saws that have teeth on both edges of the blade with the teeth handed, respectively "pull cut" on one side and "push cut" on the other side. The direction of the cut is indicated by an arrow etched into the blade.

    • It is highly recommended that this saw blade is fitted into the specially designed holder available separately. This holder allows the blade to be mounted either in a central or an offset position to increase the range of uses.

    • This blade is made from stainless steel and is quite stiff and sturdy.

  • Fine Saw Blade

    Fine Saw Blade

    Nr katalogowy: RB-T016, Producent: RB Productions

    cena:
    więcej »
    12,50 pln
    • Fine saw blade (24 t/cm - 58 tpi)

    • This is a fine saw blade and is recommended for most model-related cuts. This blade can be used to cut plastic, wood and resin. This blade was also successfully tested on softer metals such as brass, aluminium and copper.

    • This saw is inspired by the Japanese Ryoba traditional saws that have teeth on both edges of the blade with the teeth handed, respectively "pull cut" on one side and "push cut" on the other side. The direction of the cut is indicated by an arrow etched into the blade.

    • This saw blade must fitted into the specially designed holder available separately. This holder will give the blade the necessary rigidity to make the best cuts. Using this tool without the holder may lead to damage to the blade. This holder also allows the blade to be mounted either in a central or an offset position to increase the range of uses.

    • This blade is made from stainless steel.

  • Ultra-fine Saw Blade

    Ultra-fine Saw Blade

    Nr katalogowy: RB-T017, Producent: RB Productions

    cena:
    więcej »
    12,50 pln
    • Ultra-fine saw blade (48 t/cm - 120 tpi)

    • This is a very fine saw blade and is recommended especially for the finest model-related cuts. This blade can be used to cut plastic, wood and resin. The blade is paper thin and the teeth are so fine that they require magnification to be seen (but they are there neveretheless). Ideal for separating clear parts, especially vacuum-formed clear parts. This saw was also successfully tested on soft sheet metal such as brass, copper and aluminium.

    • This saw is inspired by the Japanese Ryoba traditional saws that have teeth on both edges of the blade with the teeth handed, respectively "pull cut" on one side and "push cut" on the other side. The direction of the cut is indicated by an arrow etched into the blade.

    • This saw blade must fitted into the specially designed holder available separately. This holder will give the blade the necessary rigidity to make the best cuts. Using this tool without the holder may lead to damage to the blade. This holder also allows the blade to be mounted either in a central or an offset position to increase the range of uses.

    • This blade is made from stainless steel.

  • Contour Saw Set

    Contour Saw Set

    Nr katalogowy: RB-T018, Producent: RB Productions

    cena:
    więcej »
    32,00 pln

    Contour saw (16 t/cm - 40 tpi)

    • This is a set of medium-pitch saws recommended for use on plastic, wood and resin and even some soft metals.

    • The set does not include the knife handle.

    • The set includes 5 saw blades:

    • 2 Curved saws - these can be run along a ruler as pictured below. Two sizes are included - the narrower blade can be used to follow curved edges. These saws can also get into very tight and awkward spaces.
    • 2 Tapered saws - these can follow curved lines and contours. The narrower blade can follow tighter curves.
    • 1 Two-sided saw. The teeth of this saw point in different directions to suit a variety of different uses. This saw is excellent for separating resin blocks.

    • These blades are made from stainless steel, are very rigid and sturdy and were thoroughy tested for efficiency - they will not buckle easily during use.

  • Scribe-R

    Scribe-R

    Nr katalogowy: RB-T019, Producent: RB Productions

    cena:
    więcej »
    24,00 pln
    • This is a scriber for plastic and resin. This scriber can be used in two ways:
    • the sharp “blade” end can be used in a manner similar to other scribers, either free-hand or running along a hard edge, such as a ruler. This removes a fine burr of material leaving a clean groove behind. The tip of the scriber allows it to work with scribing templates. The set includes three blades to replace worn or damaged blades.
    • the back (curved) edge of the holder has extremely fine teeth that act like a file and leave a very fine groove behind. This is ideal for scribing edge panel lines such as wing edges, fuselage spines etc but it can also be used by running it along a hard edge such as a ruler.

    • The tool is made entirely of stainless steel.

    • The set does not include the knife handle.

« pierwsza   < poprzednia następna >   ostatnia »